Reference
Cut tolerances
How each shape is cut to length, and what to expect on the cut. The saw figures are estimates until the US service center on your order confirms the cut. Where we do not hold a number, this page says so.
By shape
| Shape | Cut | Cut length tolerance | Kerf | Longest cut | Machining allowance |
|---|---|---|---|---|---|
| Round bar | Saw cut | +0.125 / -0 in (estimate) | 0.125 in (estimate) | 144 in | Optional: +0.125 in, +0.25 in or a custom length up to 12 in |
| Square bar | Saw cut | +0.125 / -0 in (estimate) | 0.125 in (estimate) | 144 in | Optional: +0.125 in, +0.25 in or a custom length up to 12 in |
| Hex bar | Saw cut | +0.125 / -0 in (estimate) | 0.125 in (estimate) | 144 in | Optional: +0.125 in, +0.25 in or a custom length up to 12 in |
| Flat bar | Saw cut | +0.125 / -0 in (estimate) | 0.125 in (estimate) | 144 in (aluminum, brass, copper); 240 in (carbon steel, stainless) | Optional: +0.125 in, +0.25 in or a custom length up to 12 in |
| Plate | Plate cut | Confirmed by the service center on your order | 0.125 in (estimate) | 144 in | Saw cuts only |
| Sheet | Sheared | Confirmed by the service center on your order | 0 in | 144 in | Saw cuts only |
| Round tube | Saw cut | +0.125 / -0 in (estimate) | 0.125 in (estimate) | 240 in | Optional: +0.125 in, +0.25 in or a custom length up to 12 in |
| Square tube | Saw cut | +0.125 / -0 in (estimate) | 0.125 in (estimate) | 240 in | Optional: +0.125 in, +0.25 in or a custom length up to 12 in |
| Angle | Saw cut | +0.125 / -0 in (estimate) | 0.125 in (estimate) | 144 in (aluminum); 240 in (carbon steel, stainless) | Optional: +0.125 in, +0.25 in or a custom length up to 12 in |
Saw cut +0.125 / -0 in (estimate). Kerf is an estimate (1/8 in bandsaw) until the service center confirms the cut.
What the cut means for your order
- You receive the ordered length, plus any machining allowance you add.
- Saw and plate kerf is estimated at 1/8 in until the service center confirms the blade. Shear kerf is 0.
- A remnant shorter than 24 in is billed as drop. You do not receive that remnant.
- A saw cut is never under the ordered length.
- A machining allowance adds to the length only, never to the cross-section. It is offered on saw cuts.
- Plate is a plate cut and sheet is sheared. Their tolerance is confirmed by the service center on your order.